原文：
               在运作效率及节省能源消耗方面，自动控制阀的运用是不可缺少的一环，传统产业界常用的手动阀、气动阀，在安装成本及效率上均不及电动阀。 业内有关人士表示，阀类在工业流程上，球阀大多用来控制各种流体的行进及流量，如水、油、化学液体等，所依据的参数有温度、压力及流量等。而工厂常用的控制阀有减压阀、气动式定温阀、电磁阀定温系统、比例式控制阀定温系统、蝶阀温度控制阀等几种类型。在选用各类自动阀时，应考虑热机的种类、要求的精度、控制阀的品质、压降、流量及其构造、故障率、厂家信用和售后服务等因素，才能达到经济实用的目的。 就产品本身而言，因电动阀具备装配容易、闸阀故障率低以及符合业界自动化需求的优点，是业者较划算的选择。因为使用一般传统气动阀，执行器与附件 免不了要有配管、电磁阀及压缩机等才能匹配，而电动阀是以马达驱动，安装简易省事，且电动阀安装配合工厂原有的自控线路即可，可节省其他成本支出。此外，通用阀门以马达驱动方式开闭较平顺，无瞬间冲力过大的缺点，故障率可大幅降低。 不少人都认为电动阀贵，使用成本高，其实不然，如果以整体计算，传统阀要加上许多配件及管路安装，价格并未占优势，反而要承担较多的保养费用。

“ Analysis of the advantages and shortcomings of automatic control valves ”是由中国蝶阀网提供的阀门新闻，译文仅供参考。另外，中国蝶阀网还提供相关产品搜索： 电动蝶阀 、 气动蝶阀、 手动蝶阀 、 不锈钢蝶阀 、 对夹式蝶阀 、 衬氟蝶阀 等。

译文：
            Operational efficiency and save energy consumption, the use of automatic control valve is an integral part of the traditional industry used manual valves, pneumatic valves, the installation cost and not efficiency and electric valve. The industry concerned that the valvesBUTTERFLY VALVES in industrial processes, the most often used to control various road and the flow of fluids such as water, oil, chemical liquid, etc., are based on parameters such as temperature, pressure and flow. The plant commonly used control valves have valve, pneumatic fixed temperature valve, solenoid valve fixed temperature system, constant temperature control valve proportionalGATE VALVES system, temperature control valves and other types. In the selection of various types of automatic valves, they should consider the type of heat engine, the required accuracy, control valve quality, BALL VALVES pressure drop, flow and Gouzao, failure rate, manufacturers Xinyong and after-sales service and other factors, to achieve economic and practical purposes. The product itself, the electric valve fitted with easy, low failure rate in the industry demand for the GLOBE VALVEadvantages of automation is the industry more cost-effective choice. Since the use of conventional pneumatic valve, inevitably a piping, solenoid valve and the compressor can match, and the electric valve is a motor-driven, easy to install, and electric valves CHECK VALVESinstalled with the original factory automation line will be able to save other costs. In addition to motor-driven way to turn more smoothly, without excessive momentum shortcomings, failures can be substantially reduced. Many people think that your electric valves, the use of high cost, otherwise, if a holistic basis, traditional valves and many accessories to installation of pipelines, price is not dominant, but they will assume more of the maintenance costs.

原文来源：http://www.1diefa.com/

2010-07-28 06:54

返回